I – HT – Axially Split Case Pump
I-HT pumps are horizontal split case single/double stage centrifugal pumps. All single stage pumps are provided with double suction type impeller. Both single stage/double stage pumps are fitted with DIN 24960 cavity mechanical seal. The impeller/s is/are centrally placed on a sturdy designed shaft and the entire rotating assembly is...
i- NS – Non Clog Submersible Pump
These are single suction pumps with overall non clogging impeller. Pump can be officered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint
i-CM – Process Pumps
Canned Motor pumps are ideal for pumping corrosive and noxious fluids that are used in chemical and process industry, refrigeration plants, paint industry and refinery & petrochemicals.
JALRAAJ – Mini Family
One of the most popular pumps in the country, this lightweight pump is suitable for a variety of purposes
JOS – OpenWell Submersible Pump
These pumps are designed for underwater applications so need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation
JVS – OpenWell Submersible Pump
These pumps are designed for underwater applications so need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation.
KAM – EndSuction Monobloc Pump
These pump motor is designed to perform optimally during low voltage fluctuation due to ability to adapt to a wide input voltage range of 120 to 220 volts. All wet parts are CED coated on surface and cavities - providing 5 times more protection from corrosion to painted pumps.
KCS / CAN – Canned Motor Pump
Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic...
KDI+ -> EndSuction Monobloc Pump
These pumps can withstand voltage fluctuations from 350-440 volts. These have flatter efficiency curve for efficient operation. These are designed to prevent overloading and motor burning and automatic air release during priming.
KDS + -> EndSuction Monobloc Pump
These pumps can withstand voltage fluctuations from 180-240 volts. These have dynamically balanced rotating parts to ensure minimum vibrations. Cast iron impeller, delivery casing, these pumps are suitable for gardening and small farm irrigation, agri for clear water handling, water supply for agri, used in apartments, buildings and hotels.
KDS LV(Low Voltage) – EndSuction Monobloc Pump
These pumps are especially deigned for low voltage with 'B' class of insulation. These pumps are designed for air release during priming and can run with two phase supply. These pumps find wide application in gardening, farm irrigation, sprinkle and so on.
KDS LV(P SERIES) – EndSuction Monobloc Pump
These pumps are majorly used in gardening, farm irrigation and sprinklers. These are especially designed for low voltage purpose and automatic air release during priming. These can be run well with two phase also.
KDT + -> EndSuction Monobloc Pump
These pumps can withstand voltage fluctuations from 180-240 volts. These have flatter efficiency curve for efficient operation. These are designed to prevent overloading and motor burning and automatic air release during priming.
KH – Agriculture End Suction Pump
These pumps are electric motor/engine driven and are used for irrigation, sprinkler irrigation and water supply. Delivery size varies from 25 mm to 50 mm.
KHDT + -> Agriculture End Suction Pump
These pumps are available with belt drive and are electric motor or engine driven. These pumps are widely used in irrigation, sprinkler irrigation and water supply. Delivery size varies from 40 mm to 65 mm.
KJ – Deep Well Jet Pump
These pumps have suction lift upto 52 meters. There is no moving parts inside the well and hence ease in servicing. These can withstand voltage fluctuations from 180-240 volts. The motor parts are dynamically balanced in order to reduce vibrations. Impeller is of cast iron. These are widely used in...
KOS – Open Well Submersible Pump
Kirloskar KOS pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
KOS +M -> OpenWell Submersible Pump
Kirloskar KOS+ M pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
KOS M – Open Well Submersible Pump
These pumps are designed for underwater applications and hence no need of priming and foot valve. These are easy to install and can withstand voltage variation from 350-440 volts. These are designed to prevent overloading and motor burning. These pumps find great use in submerged pumps in fountains, wells, sumps,...
KOS N – OpenWell Submersible Pump
Kirloskar KOS N pump is an openwell submersible pump in stainless steel motor body construction. It has wide applications in agriculture and domestic segment. Designed for underwater applications with CED coated wetted components for long life and rust free operation.
KOSi – Open Well Submersible Pump
‘KOSi’ pumps are designed to address specific needs of the Indian consumers. KOSi pumps boast of a lightweight and compact design, reduce energy consumption significantly and efficiently address electric overload issues caused due to fluctuating power supply. Additionally, customers can enjoy a better performance with KBL’s proven industry standard certification...
KP3 – BoreWell Submersible Pump
These pumps are featuring stainless steel construction and efficient design, the motor adds to the performance and longevity of the pump. The motor is also designed to perform optimally within a wide input voltage range 160 to 240 volts to offset voltage fluctuations. KU3 pumps feature lightweight and compact design...
KP4 – BoreWell Submersible Pump
These pumps are featuring stainless steel construction and efficient design, the motor adds to the performance and longevity of the pump. The motor is also designed to perform optimally within a wide input voltage range 180 to 240 volts to offset voltage fluctuations.
KPD,KPD-QF – Process Pump
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.